Hook Up Led Lights To Car. Fun Dating Sites!

Car To Lights Hook Led Up

How To Install Aftermarket Lights to Existing Wiring

How to Install Car LED Strip Lights: 5 Steps

9 May Driving lights make nighttime driving safer by enhancing forward and peripheral vision, and they add value to your vehicle. Adding an extra set of more powerful lights to the front of your car—wired to come on when the high-beam switch is activated—provides additional lighting and improves overall vision. LED light strips are a versatile way to add illumination or highlight an object. You can add LED lighting to cabinets or cars or purchase strips designed for specific objects, such as LED dog collar strips or an ArtSkills light-up poster frame kit. The process for hooking up LED light strips varies a bit depending on where you're. We will show you the HOWS and WHYS of How to install interior car lights into your vehicle.

You will be securing each of the LED strips to surround the outer edges of the vehicle underside and extending the wires up to the engine bay to power up the LED strips.

Hook Up Led Lights To Car

Before you proceed with the installation, clean the areas that you will be attaching the LED strips on. You can use a washcloth to gently wipe off any dirt or mud residue so the LED strips won't get dirty.

How to Install LED Strip Lights as Car Under Dash Light or Foot Area Lights | 24dating.me

If you have a hydraulic jack, this will greatly increase efficiency since you can jack up the car for more access to the underside of the vehicle. If you don't have a jack, you can still proceed with the installation.


All four pieces have interconnecting adapters so they can receive power from the battery. You no longer have to use an extension cord to route the power from the rear LED strip to the battery, since all the strips are attached.

You can even mix and match with the installation, by wiring some LED strips individually to the module box and connecting the adapters for the remaining strips. Route the 4 wires up to the engine bay and connect them to the module box.

If the wiring of the LED strip on the rear bumper is not long enough to reach the front of the vehicle, you may use the extension wires that come with the package. Test to make sure everything works and enjoy your set of underbody LED strips.

Strip individual wires - Use the wire stripper to cut a half inch or so of the casing off each wire. It is very important that you know which wire goes to each part of the plug. Extend the antenna on the module box so you can get better reception even if the hood is closed. Separate wires - The wires will generally be twisted around each other. Use a utility knife or a pair of scissors to cut the strips.

Search by Vehicle. This diagram demonstrates where the LED strips are to be placed, as well as the general idea as to where to route their corresponding wires up to the engine bay.

The fuse should be no more then 18 inches away from the positive terminal on the battery. Since we're not doing anything real technical, any soldering iron should do. Set the LED strip underneath your vehicle. You are currently logged in as a guest. Whether or not you choose to install the single colored LED strip or the multi-colored RGB LED strip is all based on personal preference, but here is a guide to go through the installation process.

Set the LED strip underneath your vehicle. Now is a good time to see if the underside of your car has any way of securely attaching the LED strips, including bolts, brackets or other small openings. Secure the LED strip with zip ties. We recommend zip-ties for every 12 inches of the LED strip, since double-sided tape may not be strong enough to securely attach the strip indefinitely.

Hook Up Led Lights To Car

It helps if you have a friend to help you hold the LED strip in place during the attachment process, but if not you can just use the double-sided tape to temporarily mount the LED strip in place before you permanently secure it with zip ties. If there is an optional wire, check the installation sheet to see what it's for. Place the module box close to the battery, but away from the engine or radiator so there is no risk of heat damage.

How to Hook Up LED Light Strips

Make sure the location you place the module box at will be dry at all times. Extend the antenna on the module box so you can get better reception even if the hood is closed.